google-site-verification=7DlVmmd_ndItiIG67eXUCsY1LYTobXGDajfNbLfbOqo

Flange manufacturers for your answer:Expert Guide: How to Install a Slip-on Flange


Date:

2023-10-28

At Sanshi Industry, we are committed to providing high-quality products and excellent customer service. Our flanged pipe fittings adhere to national standards and are suitable for a wide range of applications. Contact us for all your flanged pipe fitting needs.

Welcome to our website! At Sanshi Industry, we specialize in manufacturing high-quality flanged pipe fittings that are exported worldwide. If you have any requirements for national standard flanged pipe fittings, feel free to contact us. In this article, we will provide you with a step-by-step guide on how to install a slip-on flange.

Step 1: Preparation
Before installation, ensure that you have the necessary tools and equipment, including a slip-on flange, gasket, bolts, and a torque wrench. Make sure that the flange, pipe, and gasket are clean and free from any dirt or debris.

Step 2: Positioning
Align the slip-on flange with the pipe and ensure that the bolt holes are correctly aligned. Slide the flange onto the pipe, allowing it to rest flush against the pipe end. The flange should fit snugly onto the pipe.

Step 3: Inserting the Gasket
Place the gasket onto the face of the slip-on flange. Ensure that the gasket is positioned correctly and centered within the bolt holes. The gasket will provide a tight seal between the flange and the connecting pipe.

Step 4: Bolt Installation
Insert the bolts into the bolt holes, ensuring they pass through both the slip-on flange and the gasket. Hand-tighten the bolts, but avoid over-tightening at this stage.

Step 5: Torque the Bolts
Using a torque wrench, gradually tighten the bolts in a diagonal pattern. Start with a low torque setting and gradually increase the torque until it reaches the recommended value specified for the particular flange size and material. This ensures even distribution of pressure and a secure connection.

Step 6: Inspection
After tightening the bolts, inspect the flange to ensure it is secure and properly aligned with the connecting pipe. Check for any leakage around the gasket and ensure that the connection is tight and sealed.

Congratulations! You have successfully installed a slip-on flange. If you have any further questions or need assistance with flanged pipe fittings, feel free to contact us.

At Sanshi Industry, we are committed to providing high-quality products and excellent customer service. Our flanged pipe fittings adhere to national standards and are suitable for a wide range of applications. Contact us for all your flanged pipe fitting needs.
 

Key Words:

steel flange,flange,so flange,slip-on flange