google-site-verification=7DlVmmd_ndItiIG67eXUCsY1LYTobXGDajfNbLfbOqo

How do you cap a steel pipe


Date:

2023-04-28

Tube cap material is carbon steel (A3, stainless steel (304, alloy steel (15Mo3, aluminum, titanium, copper, nickel and nickel alloy, etc.

Tube cap material is carbon steel (A3, stainless steel (304, alloy steel (15Mo3, aluminum, titanium, copper, nickel and nickel alloy, etc. Purpose: Welded to the pipe end or installed on the pipe end of the external thread to cover the pipe fittings. Used to close the pipeline, and the effect is the same as pipe plugging. The blind plate is similar in form, but the blind plate is removable, and the welded cap is not removable.

Under normal circumstances the head is used at both ends of the pressure vessel and is often used. Then, the end part of the pipe force can be blocked, which is also a relief part of the pipe fitting. And the head can be used in many forms. It is also very versatile. The oval head is a fitting for a pressure vessel, and he uses a French blue plate for piping. At the end of the line, we use a head, which is essentially the same as a blind plate. We have to seal the pipe. If the head is welded, it can't be removed, but the blind plate can be removed. He was better able to clean out the material in the pipe with a blind plate. When we use the head we need to debug it first, so that we can avoid any danger when we use it. When the head is in use, its drawing die should be good, and the vent hole of the upper die can not be blocked.

Key Words:

FALINGS